Ventilator

Product Details:

SLE has always worked hard to make our ventilators easier to use. Essential functions are never more than a couple of button pushes away. Our own research has shown that users find it much easier to use a ventilator if there are fewer sub-menus. By reducing the number of menus and sub-menus the SLE5000 is even easier to use when time is critical. The SLE5000 has a high resolution colour touch-screen that is your interface to all the ventilator controls and functions, but in addition allows you to access many new features including trends and dynamic loops.

The SLE5000 also features parameter presetting, meaning that you can choose a ventilation mode and set up all parameter values before accepting these and confirming the mode change.

Features

• The ability to preset parameters in all modes of operation
• Powerful HFO with active expiration to cover a wide range of patients
• Full colour, total touch-screen operation
• Integral flow monitoring measuring lung mechanics and displaying of loops and waveforms
• Trending of measured parameters
• Standard patient circuit for all modes including HFO
• Unique, patented valveless technology
• Integral battery with up to 60 minutes operating capability
• Software based, allowing for upgrading to versions with new or improved functions
• Very quiet operation HFOV, yet with the performance to successfully provide HFO to both the smallest pre-terms and the largest infants.
• Same patient circuit is used for conventional and HFO ventilation, minimising risk of lung de-recruitment.
• Proximal Hot Wire flow sensor technology ensures sensitivity to even the tiniest of patient breathing efforts, and control of tidal volumes as small as 2ml.
• Volume targeting capability to limit and monitor delivered tidal volumes as part of the Lung Protective Strategy.
• Colour display of respiratory waveforms and key respiratory parameters, in addition to 24 hour trending data.
• Easy to set up, easy to use, easy to train, easy to clean.

Important

• Price excluded GST.
• Product without compressor and warranty.

Product Details:

Aizfi Medical Equipments is a well-known Manufacturer and Trader of ECG Machine, Anaesthesia Machine, Digital X Ray Machine, ECG Cables, Medical Ventilators, etc. Banking on our state-of-the-art infrastructure facility, we are able to fabricate a flawless range of products.

Product Details:

REFURBISHED

We are actively engaged in offering an extensive range of Nellcor Spo2 Sensor  for catering the diversified requirements of our clients.

 

Product Details:

GE Versamed iVent 201 Features

With its comprehensive list of standard features, including the latest modes of ventilation, the iVent201 is appropriate for all levels of patient acuity, from pediatric through adult, and in all care settings, from the patient’s bedside to transport to another point of care.

With its highly featured transport capability and rugged construction, the iVent201 takes ICU ventilation outside of the confines of the hospital. Optimized NIV and the Adaptive Bipap help caregivers maximize patient comfort and synchrony.

 

• Adaptive Bi-Level* (NIV)
• Preset parameters by patient weight
• Apnea backup ventilation
• Adjustable rise time
• Easy Exhale
• Sigh breath
• 100% O2 suction

Power Supply

• External AC: 100 to 240 V, 50 to 60 Hz, Max 1.6 A
• External DC: 12 to 15 V, Max 8.5 A
• Internal battery: Sealed lead-acid 12 V (7.8 Ah) (rechargeable)
• Operating time: Depending on ventilator settings and impedance – standard internal up to 2 hours, optional extended internal up to 4 hours and optional external up to 8 hours.

Oxygen Supply

• High pressure supply: 40 to 75 psi (2.8 to 5.1 bar)
• Low pressure: Max 15 L/min or 0.5 psi

Environmental

• Operating temperature: 0 to 50° C/32 to 120° F
• Storage temperature: –15 to 70° C/–4 to 140°F
• Relative humidity: 15 to 95% at 30° C/85° F
• Water/dust resistance: IP54 (splash proof)
• Atmospheric pressure: 430 to 825 mm Hg (15,000 feet)
• Vibration:
  • IEC 68-2-6 and IEC 68-2-34
  • mIL-STD-810E
• Shock:Total external sound level: 40 to 45 dBa at one meter
  • IEC 68-2-27 (100 g)
  • MIL-STD-810E

Ventilation Performance and Controlled Parameters

• Respiratory rate: 1 to 80 bpm
• Tidal volume: 50 to 2,000 ml
• Inspiratory pressure limit: 5 to 80 cm H2O
• Inspiratory time: Adaptive I-Time* or 0.2 to 3 sec
• Esens: 10-90%
• Rise time: Mid/high/max/auto
• Peak flow: Adaptive Flow* or 1 to 120 L/min; Spontaneous up to 180 L/min
• Oxygen mix (FiO2): 21 to 100%
• PEEP: 0 to 40 cm H2O
• Trigger sensitivity: 1 to 20 L/min flow sensitivity –0.5, to –20 cm H2O pressure sensitivity
• PSV: 0 to 60 cm H2O
• Positive pressure relief valve: 80 cm H2O
• Synchronized nebulizer: 5 to 240 min

Monitoring and Displayed Parameters

• Airway pressure (analog bar graph & numerical)
• Total breath rate
• I:E ratio
• Exhaled tidal volume
• Exhaled minute volume
• Peak flow
• Inspiratory time
• Electrical power source (AC/external DC/internal DC)
• Battery level
• Pressure, flow and volume Waveforms software package:Trending of monitored data (72 hours)
• Real-time pressure and flow waveforms
• Waveform history brows
• Respiratory mechanics (C, R, MAP, RR/Vt)SpO2
• Pressure, flow and volume loops

 

 

Product Details:

 

The Dräger Oxylog 2000 is a transport ventilator designed to provide support to a patient’s failing respiratory system. Because a ventilator provides vital oxygen to the lungs of a patient who is experiencing difficulty breathing on their own, these devices must be designed with several control mechanisms to provide the correct pressures and oxygen levels suitable for a given patient. The Oxylog 2000 features a compact and rugged design for portability and ease of use, as the ventilator is primarily used in emergency situations or during patient transport. It offers several volume-controlled modes such as IPPV/CMV, SIPPV / A/C, CPAP, and SIMV. It also supports both invasive and non-invasive ventilation.

 

The Oxylog 2000 uses standardized disposable tubes, which are compatible with the Oxylog 3000. An LCD screen in conjunction with an analog pressure gauge supply the operator with all the volume, pressure, and frequency information they need.

Key features of the Drager Oxylog 2000:

• Helps to optimize comfort and care of patients
• Excellent reliability and performance
• Intuitive user interface that helps in controlling life-threatening situations
• Ergonomically designed transportation solutions
• Provides flexibility to adapt as per the patient’s needs
• Provides a combination of supportive and controlled ventilation
• Compact design
• Features a flow sensor that is positioned closer to the patient for more accurate measurements of the minute volume on a real-time basis
• Has an integrated PEEP valve that can be adjusted finely between 0 and 15 mbar per cm of H2O,
• Offers shock resistance, electronic irradiation protection, and a splash guard
• Equipped with an analog airway pressure gauge and Liquid Crystal Display with two lines, showing important data including actual frequency, plain text alarms, actual tidal volume, and other parameters
• Allows an incremental adjustment of the breath-time ratio between 1:3 and 2:1
• Provides up to six hours of battery operation

 

Technical Specifications

• Time-cycled, volume-constant
• Integrated PEEP valve tolerances: 0 - 15 mbar/cm H2O
• Breath-time ratio: 1:3 to 2:1
• Battery life: 6 hours while disconnected from mains power
• Volume modes: IPPV/CMV, SIPPV / A/C, CPAP, and SIMV
• LCD Display: actual frequency, actual tidal volume, plain text alarms

 

Important

• Price excluded GST.
• Product without compressor and warranty.